Search results for " Multilevel Inverter"
showing 10 items of 11 documents
Experimental Evaluation of the Performance of a Three-Phase Five-Level Cascaded H-Bridge Inverter by Means FPGA-Based Control Board for Grid Connecte…
2018
Over the last decades, plants devoted to the generation of green energy significantly increased their number, together with the demand of same electrical energy, also stored in battery systems. This fact produced the growth of energy conversion systems with advanced performances with respect to the traditional ones. In this circumstance, multilevel converters play a significant role for their great advantages in performances, flexibility, fault-tolerability, employment of renewable energy sources and storage systems and finally yet importantly reduced filter requirements. In this context, this paper faces the performance of a cascaded H-bridge 5 level inverter in terms of harmonic distortio…
Cascaded H-Bridges Multielvel Inverters: grid connected advanced applications
Power electronics is going to increase in the modern electrical systems. It is well known that the use of power electronics allows the management and the control of the energy flow, obtaining voltage and current waveforms suitable for electrical loads. In this scenario, multilevel power converters are finding increased attention in industry and academia as one of the promising choices of electronic conversion thanks to their features and many different application fields with high power and medium voltage. Moreover, they are fundamental in interfacing electric grid to high power renewable energy systems (i.e. PV, Wind farm, Biomass, Fuel Cell etc.). Nowadays, the research is focused on the …
A novel method for harmonic mitigation for single-phase five-level cascaded H-Bridge inverter
2018
The efficiency of a system is a very important parameter for high power electrical drives applications. Moreover, the efficiency of power converters plays a fundamental role. Aim of this work, is to propose a novel selective harmonic mitigation method without solving non-linear equations. Through a very simple approach, the polynomial equations which drive the control angles have been detected for a single-phase five-level cascaded H-Bridge inverter. The obtained polynomial equations can be easily implemented in a digital system to real-time operation. The paper also presents the simulation analysis and experimental validation.
Enhanced Modelling for Extended Performance Analysis of Interior Permanent Magnet Synchronous Machine Drive fed with Cascaded H-Bridges Multilevel In…
2021
This paper presents a comparative simulation analysis of an Interior Permanent Magnet Synchronous Machine (IPMSM) performance once fed by a traditional three-phase two-level inverter and then using a three-phase five-level Cascaded H-Bridges Multilevel Inverter (CHBMI). For this purpose, an enhanced mathematical model of the IPMSM, that take into account simultaneously saturation, cross-coupling, spatial harmonics and iron loss effects, has been employed. Furthermore, two different PWM modulation strategies have been considered. The study was conducted for several working conditions, evaluating the impact of CHBMI adoption on the IPMSM performance in terms of improved efficiency and torque …
A Novel Symmetrical Boost Modulation Method for qZS-based CHB Inverters
2020
Quasi-Z-source cascaded H-bridge (qZS-CHB) inverters are arising as an innovation in the field of the electrical conversion for PV applications. This type of converters inherit the advantages of multilevel inverters and single-stage configuration. In this context, this paper proposes a novel symmetrical boost modulation strategy for qZS CHB multilevel inverters to increase the performance in terms of voltage stresses and power quality. The novelty lies in the adoption of a different concept to generate the shoot-through states compared to the traditional methods. Simulation analysis in a grid connected application to evaluate the benefits of this boost method is performed in the MATLAB/PLEC…
Dead-time impact on the harmonic distortion and conversion efficiency in a three-phase five-level Cascaded H-Bridge inverter: mathematical formulatio…
2023
To avoid leg short-circuit in inverters, dead time must be introduced on leg gate signals. Dead time affects the inverter output voltage fundamental harmonic amplitude, voltage harmonic distortion and inverter efficiency by introducing additional voltage drops. In this regard, dead time effects have been widely investigated for traditional two-level three-phase voltage source inverters in the literature but not extensively for multilevel topology structures. This paper provides a detailed analysis of dead time impact on the harmonic distortion and efficiency of Cascaded H-Bridges Multilevel Inverters (CHBMIs). For this purpose, a general mathematical formulation to determine voltage drop du…
Graphical THD minimization procedure for single phase five-level converters
2017
This paper proposes two graphycal procedure to mitigate h harmonics and to minimize the total harmonic distortion (THD), respectively. The paper considers a five-level inverter and fundamental frequency modulation: it computes the two switching angles able to reduce low order harmonics and able to minimize the THD. Simulation results are obtained and, in order to validate the proposed procedure, an experimental prototype is built and experimental results are carried out. The comparison between simulation and experimental results confirms the accuracy of the proposed graphycal procedure. It is shown that the switching angles to mitigate the third-fifth and the third-fifth-seventh harmonics e…
Novel Computational Method for Harmonic Mitigation for Three-phase Five-level Cascaded H-Bridge Inverter
2018
The efficiency of the system is a very important parameter for high power electrical drives applications,. Moreover, in the system the efficiency of the power converter play a fundamental role and for this reason, the soft switching modulation techniques represent the best choice. This paper presents a novel computational method for harmonic mitigation on the output voltage of a five-level, three-phase Cascaded H-Bridge Inverter without solving non-linear equations. Through this simple approach the Working Areas have been identified in which the harmonics reference have minimum amplitude possible. Moreover, polynomial equations to evaluate the control angels have been found. In this way, th…
Selective harmonic mitigation with asymmetrical staircase voltage waveform for a three-phase five-level Cascaded H-Bridge Inverter
2020
Selective harmonics elimination or mitigation strategies are used in all applications where it is necessary to rise the efficiency and reliability of the overall system. This paper presents a simple approach to reduce the low order harmonics amplitude of an asymmetrical staircase voltage waveform for a five-level, three-phase Cascaded H-Bridge Inverter without solving non-linear equations. Through this simple approach, polynomial equations to evaluate the control angels in real-time operations have been found. The effectiveness of the harmonic mitigation method has been tested through the simulation analysis in MatLab/PLECS environment.
Mathematical formulation of pulse amplitude modulation selective harmonic elimination in multilevel three phase inverters
2022
In this paper multilevel cascaded H-bridges (CHB) three phase inverters with 2n dc sources, n=1,2,3,... are considered and a mathematical formulation providing both 2n switching angles and dc voltage source to eliminate n+1 harmonics and their respective multiple from their output voltage waveform, is proposed. The computed angles don't depend on modulation index and the source voltages linearly vary with it. The proposed procedure finds the solution through an analytical formula that avoids to solve transcendental systems and presents very low computational cost. A lot of low order harmonics are eliminated, returning a very low total harmonic distortion (THD). Particularly for 9-level conf…